1. Press [Dup/Comb].
2. Press the [ ] or [ ] key to select [Manual 2 Sided Scan Mode], and then press the [OK]
key.
3. Place the original front side down and top to the machine rear on the exposure glass.
Place the originals one by one.
4. Press the [B&W Start] key or [Color Start] key.
5. After "Set Back Side & Start" appears on the display, place it on the exposure glass again
with its back facing down.
6. Press the [B&W Start] key or [Color Start] key again.
Use the same mode (color or black-and-white) for both sides.
• After you place the originals, press the [B&W Start] key or [Color Start] key within the time
specified in [System Auto Reset Timer]. Otherwise, the job is canceled. For details, see page 228
"Administrator Settings".
• This function is not available with the Sort function.
Copying 2-Sided Originals with 2-Sided and Combined Printing (Manual 2-Sided Copying)
115
