If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
ON
Switching on
1. Place your clock radio on a flat surface. Plug the mains lead into a wall
socket and switch on. Note your clock radio will not switch on until
the clock has been set.
2. The Time Capsule will automatically activate the Radio Controlled
clock and initiate a search for the time signal. When first connected
to the mains supply the MSF signal indicator shows the MSF signal
level. Rotate the Time Capsule or change its position until the highest
signal level is obtained.
3. In most locations the time capsule can be placed behind a
bedside cupboard out of sight. If necessary the Time Capsule can
be secured to the cupboard using the double sided tape provided. If
a more permanent installation is required the base of the Time
Capsule can be snapped open at the split line - the base can then be
secured using two small screws. The top section can then be snapped
back onto the base.
4. We recommended that your clock radio and Time Capsule are placed
as far away as possible from any sources of interference such as
computers or televisions, etc.
5. When your Time Capsule is receiving the radio time signal, the
seconds digits will appear in the display and the colon will flash once
every second in time with the radio time signal. When the time setting
process has been completed, the exact time and day of the week will
appear in the display. The MSF signal indicator becomes the Day
of week indicator after initial time setting has taken place.
6. Your clock radio will automatically switch from summer to winter time
and vice versa by following the radio time signal. The Automatic
summer time indicator will light up during summer time.
Weekend
Cancel
MSF Signal
Sun
1234567
Mon Tue Wed Thu Fri
Sat
Auto
Summer
6