43
EditingMasteringUsing USBConvenient
Functions
Appendixes Quick StartGetting Ready
to Record
Recording/
Playback
Using
Effects
Using
Rhythm
Playing Back Repeatedly (Repeat)
By using the “repeat” function you can repeatedly play
back a specified region.
The repeat region will repeatedly play back as follows.
fig.01-570
1
Press the [REPEAT] button at the point where you
want to start repeating (point A).
fig.Repeat01.eps
The Repeat A symbol ( ) will appear in the screen,
indicating that the beginning of the repeat (point A)
has been specified.
2
Press the [REPEAT] button at the point where you
want to stop repeating (point B).
fig.Repeat01.eps
The Repeat B symbol ( ) will appear in the screen,
indicating that the repeat region (A-B) has been
specified.
3
When you want to clear the repeat setting, press the
[REPEAT] button once again.
The repeat settings will be cleared, and the repeat
symbol will disappear from the screen.
4
If you want to save the repeat region you specified,
save the song.
“Saving a Song (SAVE CURRENT STATE)” (p. 109)
Specifying the Repeat
Region
Repeat
Repeat Start
(A)
Repeat End
(B)
Time
• There must be at least one second between the
repeat start (A) and end (B) points. You can’t set
the end point closer than one second from the
start point.
• If you press the [REPEAT] button at a location
closer than one second from the repeat start point
(A), the repeat start point (A) will be re-set at that
location.
BR800_e.book 43ページ ２０１０年３月２日 火曜日 午後６時４０分
