![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/5/73/5734817d-718d-4d0f-a096-c784bac81de3/5734817d-718d-4d0f-a096-c784bac81de3-bg38.png)
56_ playback
playback
Slow motion
In Pause mode, press ( ) button for slow motion. Press the ( ) button repeatedly to play slow motion at
1/10, 1/7, 1/5 normal speed. Press the PLAY button twice to resume normal viewing.
S-VHS Playback
The DVD Recorder & VCR allows you to playback high quality S-VHS tapes.
Insert an S-VHS tape into the VCR deck.
Press
PLAY ( )
button on the remote control or on the front panel to play an S-VHS tape.
Variable Search System
Each time you record a cassette on this DVD Recorder & VCR, an index is automatically marked on the tape
when recording is started.The Search function allows you to fast-forward or rewind to a specifi c index and
start playback from that point.
This DVD Recorder & VCR uses a standard indexing system (VISS).
As a result, it will recognize indexes marked by other VCRs using the same system and vice versa.
Go To Zero
Use this feature when you want to search for the 0:00:00 counter position on a cassette.
Press the CANCEL button at the point on the tape where you
want to set the counter to 0:00:00.
While the cassette is stopped, press the ANYKEY button.
Press the
▲▼
buttons to select Go To Zero, then press the
ENTER button.
The VCR will rewind or fast forward, searching for the 0:00:00
counter position, and then automatically stop at that position.
End Search
Use this feature when you want to search for a blank position to record a program on a cassette.
While a cassette is stopped, press the ANYKEY button.
Press the
▲▼
buttons to select End Search, then press the
ENTER button.
The VCR will fast forward, searching for a blank position, and
then automatically stop at that position.
If the VCR reaches the end of the tape during end search, the
tape will be ejected.
Forward/Reverse Intro Scan
Use scan and play when you don’t know exactly where a program is located on a cassette tape.
While a cassette is stopped, press the ANYKEY button.
Press the ▲▼ buttons to select Forward Intro Scan or
Reverse Intro Scan, then press the ENTER button.When an
Index mark is found the DVD Recorder & VCR will playback the
tape for 5 seconds, after which it will continue searching for the
next Index mark.
1.
2.
•
1.
2.
3.
1.
2.
1.
2.
Go to Zero
End search
Forward Intro Scan
Reverse Intro Scan
>Move sEnter
Go to Zero
End search
Forward Intro Scan
Reverse Intro Scan
>Move sEnter
Go to Zero
End search
Forward Intro Scan
Reverse Intro Scan
>Move sEnter
01613A-03-VR375-XAA-ENG.indb 5601613A-03-VR375-XAA-ENG.indb 56 2008-06-11 오후 2:18:382008-06-11 오후 2:18:38