A SERVICE OF

logo

Open as PDF
next previous
82
Contents
Chapter Contents
• When you specify multiple shots, image brightness and white
balancearedeterminedbytherstshot.Moretimeisrequired
betweenshotswhentheashresorwhenyouhavespeciedto
take many shots. Shooting will stop automatically when the memory
card becomes full.
• Whenadelaylongerthantwosecondsisspecied,twoseconds
before the shot, the lamp blinking and self-timer sound will speed
up.(Thelampwillremainlitincasetheashres.)
Still Images
Deactivating the Flash
Preparethecameraforshootingwithouttheashasfollows.
Congurethesetting.
Press the <r> button, press
the <q><r> buttons to choose
[!], and then press the <m>
button.
Once the setting is complete,
[!] is displayed.
To restore the original setting,
repeat this process but choose
[
].
•Ifaashing[ ] icon is displayed when you press the
shutter button halfway in low-light conditions, mount the
camera on a tripod or take other measures to keep it still.