My Camera > Shooting modes
69
Using Z
The Z allows you to zoom in on a subject with less degradation of
photo quality than the Digital zoom. However, the photo resolution may
change compared to when you zoom in by rotating the zoom ring.
1
On the Mode screen, touch Expert
→
Program, Aperture
Priority, Shutter Priority, or Manual.
2
Press [i-Function] on the lens to select Z.
•
You can also press [i-Function], and then drag the screen.
3
Adjust the focus ring to select a zoom ratio.
•
You can also rotate the command dial or drag the screen to select
an option.
•
Photo resolution varies according to the zoom ratio if you use the
Z.
3:2 16:9 1:1
x1.2
4560X3040 (13.9M) 4560X2568 (11.7M) 3040X3040 (9.2M)
x1.4
3888X2592 (10.1M) 3888X2184 (8.5M) 2592X2592 (6.7M)
x1.7
3264X2176 (7.1M) 3264X1840 (6.0M) 2176X2176 (4.7M)
x2
2736X1824 (5.0M) 2736X1536 (4.2M) 1824X1824 (3.3M)
These gures are based on the maximum resolution at each image ratio.
4
Half-press [Shutter] to focus, and then press [Shutter] to
capture the photo.
•
Z is not available when you capture burst shots.
•
Z is not available when you capture photos in the RAW le format.
•
Z is deactivated when you record videos by pressing the video
recording button.
•
This function is not available when you set 3D Auto Mode in 3D mode.
