ENGLISH
IEEE 1394 Data Transfer
8080
■ CPU: faster Intel
®
Pentium III™ 450MHz compatible.
■ Operating system:Windows
®
98SE, ME, XP, Mac OS (9.1~10.2)
■ Main memory: more than 64 MB RAM
■ IEEE1394 add-on card or built in IEEE1394 card
1. Set the Power switch to PLAYER.
2. Set the Mode switch to TAPE.
(SC-D353/D354/D355 only)
3. Connect the DV cable (not supplied)
from the DV jack of the Camcorder
to the DV jack of the other DV device.
■ Make sure that is displayed on
the LCD screen.
4. Press the Start/Stop button to begin
REC PAUSE mode.
■ PAUSE is displayed on the LCD screen.
5. Start playback on the other DV device while you monitor the
picture.
6. Press the Start/Stop button to start recording.
■ If you want to pause recording momentarily, press the
Start/Stop button again.
7. To stop recording, press the (STOP) button.
[ Notes ]
■ When using this Camcorder as a recorder, the pictures that appear
on a monitor may seem uneven, however recorded pictures will not
be affected.
■ Operation is not guaranteed for all the recommended computer
environments mentioned above.
■ While transmitting data from the Camcorder to PC at strong
electric field and strong magnetic field, VIDEO signal or AUDIO
signal may transmit with noise.
Recording with a DV Connection Cable
System Requirements
IEEE 1394
■ CPU:Intel
®
Pentium III
TM
450Mhz .
■ :Windows
®
98SE, ME, XP, Mac OS(9.1~10.2)
■ : 64MB RAM
■ IEEE 1394
1.
PLAYER
( )
2. Mode TAPE(
)
(
SC-D353/D354/D355)
3. DV ( )
DV /
DV DV
/
■
4.
Start/Stop
( / )
REC PAUSE
( )
■ PAUSE( )
5. , DV
6.
Start/Stop
(
/
)
■ ,
Start/Stop
(
/ )
7. , (STOP( ))
■ ,
,
■
■ (PC),
video
audio
DV
