If a document is loaded in
the document tray, the
machine automatically
begins to SEND.
To stop redialling, press STOP. The
machine returns to Standby mode.
If you press DELETE when you find a
number, that number will be deleted.
When you dial a number, the unit
pauses for about 3 seconds at the point
where you pressed PAUSE.
If you require a longer pause time,
press PAUSE twice.
Each time you press the button,
another one of the 5 last-called
numbers appears in the display.
TX
With some private telephone systems, you must dial an access code (9, for example) and
listen for a second dial tone before dialling an outside number. In such cases, you must
insert a pause in the number.
To insert a pause
1
While entering the
number, press PAUSE.
Using TONE (Switching from Pulse to Tone)
You may often need to use Touch Tone dial signals to perform special operations by
phone. Bank-by-phone and voice mail are two examples of systems that require these
tone signals. If you have pulse service, you can still send Touch Tone signals by
following these steps.
1
Dial the number using
pulse dialling.
