88
WPS Button Connection
WPS (Wi-Fi Protected Setup) is a standard for easy and secure
wireless network set up and connection by pushing a button
instead of entering a network name and wireless security PIN. To
use WPS, the connecting device must support WPS and be
compatible with Wi-Fi Protected Access (WPA) security. WPS can
automatically set up a random network name and WPA wireless
security for wireless Wi-Fi phones, routers, access points,
computers, adapters, and other electronic devices.
1. From the Home screen, tap
Settings
Wireless
and network
Wi-Fi settings
.
2. Tap
WPS button connection
.
3. Press the WPS button on your Wi-Fi access point within two
minutes.
Add Wi-Fi network
To manually add a Wi-Fi network to the networks list:
1. From the Home screen, tap
Settings
Wireless
and network
Wi-Fi settings
.
2. If necessary, tap
Wi-Fi
to turn it on (green check mark in the
selection box).
3. Tap
Add Wi-Fi network
.
4. Enter the SSID (Service Set Identifier) and Security settings
then tap
Save
.
Note:
An SSID is a unique key that identifies a wireless LAN. Its purpose is to
stop other wireless equipment from accessing your LAN — whether
accidentally or intentionally. To communicate, wireless devices must be
configured with the same SSID.
Wi-Fi Direct settings
Wi-Fi Direct allows Wi-Fi devices to talk to each other without the
need for wireless access points (hot spots).
Note:
Activating this feature will disconnect your current Wi-Fi network
connection.
1. From the Home screen, tap
Settings
Wireless
and network
Wi-Fi Direct settings
.
2. Tap
Wi-Fi Direct
. A check mark displays next to the feature
indicating it is enabled. Your phone will search for other
devices enabled with Wi-Fi direct connections.
3. Tap a device name to begin the connection process.
Note:
The target device must also have Wi-Fi Direct service activated and
running before it can be detected by your device.
