: PTZ icon
This icon appears when setting the PTZ device
and it changes to yellow when operating the PTZ.
: Audio icon
This icon represents the ON/OFF status of audio
and it changes to yellow when the audio is set to
ON. It does not appear in Video mode or when
the audio is disabled.
: Sensor Active icon
This icon appears in the channel linked with the
external sensor signal when the sensor is active.
: Motion Event icon
This icon appears in the Motion Event channel
when the motion detection is set to ON.
: Zoom icon
This icon appears while the Zoom operation
is active and disappears by canceling the
operation.
: Freeze icon
This icon appears in Freeze mode and
disappears by canceling the freeze operation.
: Recording Hard Disk Full icon
This icon appears when the hard disk space is
not sufficient when recording.
: Auto Sequence icon
This icon appears in Auto Sequence mode.
: Backup Play icon
This icon appears when the backup data is now
played.
: Fan Error icon
This icon appears when the fan does not work
properly.
: No HDD icon
This icon appears when there is a dysfunctional
hard disk.
When the Fan Error icon or No HDD
icon appears, please contact the service
center.
V.Loss/V.Off: Video input status
When there is no video data input while the video
is active, V.Loss appears in the channel. When
you set the Video On/Off to OFF, V.Off appears.
Live screen modes
The SHR-5162 model receives 16 live images
and displays them in the following 9 modes
as shown in the picture. To see each mode in
order, repeatedly press the MODE button on the
front panel or remote control. But the SHR-5082
model has no 16-split mode.
