4. Select 3:Connection.
5. Select Data in only and press <OK>.
Notice that the phone displays “No incoming voice calls can
be received”. Your phone returns to standby mode and
displays *DATA ONLY*. (pls cfm!!)
To return to Standby mode from Data/Fax mode:
1.
Make sure that your phone is connected to your computing
device and is powered “On.”
2.
From Standby mode, press <Menu> for the
Main Menu
.
3. Select 0:Setup and then 3:Web.
4.
Select
3:Connection
.
5. Select Voice Call only and press <OK>.
Notice that the phone displays “No incoming data/fax calls
can be received”. Your phone returns to standby mode. (pls
cfm!!)
Note:
The phone always powers up in voice call mode, even if it was
powered down in Data/Fax mode. The phone also returns to voice call
mode if the data cable is disconnected.
Changing User Name
Details Required!!!
Signing In/Out
Details Required!!!
Location Settings
(pls cfm!!!!)
With the Location menu, emergency calls allow rescue personnel
to find you when they otherwise might not know your location,
provided that you are in a Sprint PCS Service area and the
service is available. This feature can also be turned off (except
during an emergency call) to ensure your privacy. For a stronger
location signal, make sure the antenna is fully extended.
Settings
The settings allow you to turn the location feature on or off. If
the option is turned off, the Sprint PCS Network cannot locate
your position using the Location feature. This option is
automatically turned on when an emergency call is placed, then
turned back off when the call is completed.
To turn the Location feature on or off:
1. From Standby mode, press <Menu> for the Main menu.
2. Select 8:Setup and then 9:Others.
3. Select 7:Location and then Select 1:Settings.
4.
Read the Location disclaimer by using the navigation key.
5. Press <OK> to display the Turn Location screen.
6.
Select
On
to turn the feature on or
Off
to turn it off.
7. Press <OK> to save and exit.
Message Settings
Details Required!!!
Security Settings
By using the security setting on your Sprint PCS phone, you
