When preparing to use vacuum, fi rmly
push the electrical cord down into
the cord retainer. This will place the
electrical cord out of the way while you
To collapse the handle from the upright
position, press handle collapse button,
rotate handle down until latch in hand
grip locks onto the body.
This unit has two convenient cord
storage hooks attached to the
handle. Wind the cord around the
hooks and fasten the plug to the
cord to prevent unwinding.
Cord Storage Hooks
6
Cord Storage Hooks
The handle release pedal is
located next to the fl oor between
the two wheels on the back of
the cleaner. Step on the handle
release pedal and pull back
handle to find a comfortable
operating position. Handle will
automatically lock into storage
position when handle is rotated
This unit uses a cogged, non-
stretch belt. If a large object
causes the brush roll to jam, the
brush roll motor shuts off and the
Reset Light illuminates. Turn off
and unplug the unit. Check the
brush roll for debris and clean if
needed. Press the reset button,
plug in the unit and turn on to
The reset light is a neon light that
illuminates when the brush roll
jams. See reset button above
for actions to take when this light
