SCOTSMAN WOOD FURNACE – INSTRUCTION MANUAL
Scotsman
Oct-06
2
KERR SCOTSMAN Wood Furnace Model DB-101-ADD
Tested and Listed by: Energy Testing Laboratory of Maine
Certified by the Canadian Standards Association (CSA) Sept. 1981
COSP No. WCP 001 – Free-Standing
COSP No. WCP 005 – Add-On
Manufactured by: Parrsboro Metal Fabricators Ltd.
P.O. Box 637, Crossroads
12118 Highway 209
Parrsboro Nova Scotia, Canada
B0M 1S0
SPECIFICATIONS
Length 39”
Width 29”
Height 44 1/2”
Shipping Weight 392 lb.
Fire Box 1/8”plate Length 36”
Diameter 23”
Secondary Heat Exchanger 14 gauge steel
Fire Box Door Cast Iron 13” x 13”
Warm Air Plenum 32 1/4” x 25 1/2”
Return Air Plenum N/A
Air Filter Size 20” x 20”
Blower Size G9 – 10
Blower Motor 1/4 hp
C.F.M. 1000 (Required)
Smoke Pipe 7” Inside Diameter
Floor to smoke pipe center 38 3/4”
Output (max) 140,000 Btu/h
Fuel Wood 30” logs
Electrical Rating Volts 120, Cycles 60, Amps 15
NOTE – Keep this manual in a safe place for future reference. Follow manual carefully
for the correct way to install and operate this unit.
CAUTION – Do not fire this unit until operating instructions have been read and fully
understood.
INSTALL WOOD FURNACE ONLY ON A FURNACE DUCT SYSTEM
AND CHIMNEY THAT ARE IN GOOD CONDITION.
SAVE THESE INSTRUCTIONS
