SECO-LARM U.S.A., Inc. 7 SECO-LARM U.S.A., Inc. 33 7
Viewing:
The main screen shows live data from cameras connected to the DVR.
1. Display Modes – when viewing the main screen, scan through the modes by pressing the
MODE button on the front panel/remote. Using the mouse, right click the main screen and
choose Mode. See each mode description below for further instructions.
a. Full screen – shows one channel. Access this view by pressing a channel button on the front
panel/remote, or left clicking any channel image (left click to return to all-channel view.)
b. Tile mode – Channels will display in the following modes:
2x2, 3x3 (DR-108Q and DR-116Q only), 4x4 (DR-116Q only)
i. Access this view by pressing the MODE Button on the front panel/remote, or right clicking
the mouse and choosing Mode.
ii. Tile mode will cycle through all channels in each mode before moving to the next mode.
(For example, DR-116Q will cycle through channels as follows: 1~4, 5~8, 9~12, 13~16,
1~9, 10~16, 1~16).
c. Sequence – DVR will automatically cycle through channels.
i. Press the SEQ button on the front panel/remote. Using the mouse, right click the main
screen and choose Sequence.
ii. The DVR will scan through all channels using the current display mode. For example, in
the Full Screen mode, the DVR will scan through each channel in full screen. In tile mode,
the DVR will scan through channels depending on how many channels are displayed at a
time. For example in 2x2 mode, the DVR will display 4 channels at a time.
2. Freeze – freezes images on the present screen. From the main screen, press FREEZE on the
front panel/remote. Using the mouse, right click the main screen and choose Freeze.
3. Quick Zoom – zooms the screen 2x.
a. When viewing the main screen, press ENTER on the front panel/remote.
Press ENTER to zoom out.
b. For Full Screen mode, present channel will zoom. For other modes, the last selected channel
will zoom.
c. Pan up/down/left/right using the front panel/remote.
4. Certain icons will appear on screen while in any display mode. Please refer to the following
chart for descriptions.
