CPD-3457
SHARP ELECTRONICS CORPORATION
Network Office Systems Group
Sharp Plaza, Mahwah, NJ 07430-2135
1-800-BE-SHARP
www.sharpusa.com
GENERAL SPECIFICATIONS
Type: Console
Copy System: 4-beam Laser Electronic
Originals: Sheets, bound document, photographs
Original Size: Max. 11" x 17"
Copy Sizes: Max. 11" x 17"; Min. 5.5" x 8.5"
Copying Speed: 80 ppm (8.5" x 11" at 100% ratio)
61 ppm (letter-R)
52 ppm (legal)
43 ppm (ledger)
Continuous Copy: Max. 999
Copy Ratio: 25%-400% in 1% increments
Fixed Presets: 25%, 50%, 64%, 78%, 95%,
100%, 121%, 129%, 141%, 200%, 400%, 800%
Printing Resolution: 600 x 2400 dpi (with smoothing)
Gradation: 256 levels
Duplexing: Standard
First Copy Time: Approx. 3.6 seconds
Warm-Up Time: Approx. 7 minutes
Original Feed System: Reversing Automatic Document Feeder (RADF)
Hard Drive: 3.2 GB
Memory Size: 32 MB
Document Storage Capacity: 1,000 pages (letter-size)
Copy Paper Feed: 3,500-Sheet Adjustable Paper Cassettes
4,000-Sheet Large Capacity Feeder
100-Sheet “Smart” Bypass Tray (letter-size)
Fusing System: Heat Rollers
Developer System: Dry Developer
Exposure System: Moving optical source, slit exposure (stationary
platen) with automatic exposure function
Light Source: Halogen Lamp
Required Power Supply: 115 Volts, 60Hz, 20 Amp Dedicated
Power Consumption: Maximum 2.0 kw
Dimensions: 36.3" x 29.2" x 43.7" (w x d x h)
Weight: Approx. 550 lbs.
EMBEDDED CONTROLLER SPECIFICATIONS
PDL Support: PCL5e/ + PCL XL, Postscript Level II Emulation
Memory: 16 MB Standard; 48 MB max.
CPU: PowerPC 603e 200 MHz
Client Operating Windows
®
3.1, 95, 98, 2000, NT 4.0,
System Support: Macintosh
®,
UNIX
®
, HP/Sun, Solaris
Network Operating Netware
®
3.x, 4.x, 4.x (NDS) Windows
®
System Support: 95, 98, ME, 2000, NT 4.0, UNIX
®
Protocol Support: IPX/SPX, TCP/IP, Ethertalk
®
, LPR/LPD, SNMP
I/O Interface: 10BaseT, 10Base5, 10Base2, 100BaseT
Print Resolution: 600 x 2400 dpi
Print Speed: Equivalent to engine speed
Duty Cycle: Equivalent to engine duty cycle
Paper Supply 3 x 500-Sheet Cassette, 4,000-Sheet LCT
Acceptable Paper Sizes: Statement-R (5.5 x 8.5) to Ledger (11 x 17),
17-22 lbs; Manual feed from Stack Feed
“Smart” Bypass 16-41 lbs. (90 lb. index)
Acceptable Paper: Standard bond, overhead
Multiple Prints: 1-999
Page Orientation: Portrait or landscape
Simplex/Duplex: Simplex & Duplex Printing Control
Duplex Modes: Short Edge Bind/Long Edge Bind
Finishing: Sort/Staple, Sort & Saddle Stitch
(optional finisher required)
Paper Sources: All available sources & Stack Feed
“Smart” Bypass
AR-FN8 FINISHER SPECIFICATIONS
Copy Paper Size: Statement to Ledger
Thickness: Non-staple: 16-41 lbs. (90 lb. index)
Staple: 17-22 lbs.
Stapling Function: 50 sheets
Power Requirements: Supplied from copier
Dimensions: 28.2" x 23.7" x 39.9" (w x d x h)
Weight: 79 lbs
AR-FN9 SADDLE-STITCH FINISHER SPECIFICATIONS
Copy Paper Size: Statement to Ledger
Thickness: Non-Staple: 16-41 lbs. (90 lb. index)
Staple: 17-22 lbs.
Stapling Function: 50 sheets
Stapling Function Saddle Stitch: 15 sheets
Copy Paper Size (Saddle Stitch): Letter, Ledger
Power Requirements: Supplied from copier
Dimensions: 28.2" x 23.7" x 39.9" (w x d x h)
Weight: 122 lbs.
AR-PN2B HOLE PUNCH UNIT SPECIFICATIONS
Copy Paper Size: Letter to Ledger
Thickness: 16-41 lbs. (90 lb. index)
Hole Punch Function: 2 or 3 hole punch capability
Power Requirements: Supplied from copier
Design and specifications are subject to change without notice.
Sharp is a registered trademark of Sharp Corporation. All trademarks
and registered trademarks are owned by their respective holders.
As an ENERGY STAR
®
Partner,
SHARP has determined that this
product meets the E
NERGY STAR
®
guidelines for energy efficiency.
specifications
