Clearing Paper Jams
98
6
Close the print compartment cover,
making sure it clicks into place.
Caution!
Close the cover slowly to make
sure it doesn't pinch your fingers.
5
Wind the film slightly (rotate the
gear on the right side of the rear
spool) so that there is no slack in
the film. Make sure that both edges
of the film wind onto the spool
evenly.
4
Replace the imaging film, making
sure that the flange goes into the
rear slot on the left side of the
printing compartment. Also, make
sure that the right, rear gear
engages with the gear below it.
all-fo1530a.book Page 98 Tuesday, December 5, 2000 2:07 PM
