5
This chapter provides basic information about the machine. Please read this chapter before using the machine.
PART NAMES AND FUNCTIONS
EXTERIOR
(1) Finisher / saddle stitch finisher*
This can be used to staple output. The saddle stitch
finisher can automatically staple output at the center line
and fold the pages to create a pamphlet.
☞ FINISHER / SADDLE STITCH FINISHER (page 49)
(2) Punch module*
This is used to punch holes in output.
☞ PUNCH MODULE (page 57)
(3) Inserter*
Paper loaded in the inserter can be inserted into output
from the machine as covers and inserts.
☞ INSERTER (page 58)
(4) Automatic document feeder
This automatically feeds and scans multiple originals. Both
sides of 2-sided originals can be automatically scanned.
☞ PLACING THE ORIGINAL (page 44)
(5) Front cover (upper)
Open this to replace a toner cartridge or clear a paper
misfeed from the paper pass unit.
☞ REPLACING THE TONER CARTRIDGES (page 74)
(6) Front cover (lower)
Open this to switch the main power on and off.
☞ TURNING THE POWER ON AND OFF (page 16)
☞ 5. MAINTENANCE (page 65)
(7) Operation panel
This is used to select functions and enter the number of
copies.
☞ OPERATION PANEL (page 10)
(8) Right Tray
Output can be delivered to this tray.
(9) Output tray (center tray)
Output is delivered to this tray.
* Peripheral device.
1
BEFORE USING THE MACHINE
(1) (2) (3)
(4) (5) (7) (8) (9)(6)
When a finisher /
saddle stitch finisher
is not installed
When a finisher is
installed
