76
PROGRAMMING AN ADMINISTRATOR
PASSW ORD
1
Press the [SPECIAL FUNCTION] key.
The special function
screen will appear.
2
Select "SYSTEM SETTINGS" with the
[ ] or [ ] key.
3
Press the [OK] key.
The administrator
password entry screen
appears.
4
Use the numeric keys to enter the
five-digit administrator password.
• If this is the first time you are programming the
administrator password, enter the factory default
code. (Page 101)
• " " appears for each digit that you enter.
• The special modes screen will appear with
"CHANGE ADMIN PW" selected.
5
Press the [OK] key.
The administrator
password change screen
appears.
6
Enter the new 5-digit administrator
password with the numeric keys.
Any 5 digits can be used for the administrator
password.
7
Press the [OK] key.
• The previously programmed
administrator password is
replaced by the new
administrator password.
• Press the [CA] key to return to
the base screen.
EXPOSURE
COLOUR MODE
PAPER SE
RESOLUT
COPY
SCAN
SPECIAL
FUNCTION
LINE
DATA
DATA
ON LINE
SPECIAL FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
DISPLAY CONTRAST
PQ
ACC
LEX SCAN
LEX SCAN
ED COPY
SPECIAL FUNCTION
PAPER SIZE SET
DISPLAY CONTRAST
TOTAL COUNT
SYSTEM SETTINGS
Enter admin
password.
ADMIN PASSWORD:
-----
ABC DEF
JKLGHI MNO
TUVPQRS WXYZ
@.-
_
READ-END
ACC. #-C
INTERRU
MODE SELECT
CHANGE ADMIN PW
COPIER
PRINTER
SCANNER
OK
CHANGE ADMIN PW
PRESENT:22222
NEW :-----
WXYZ
CHANGE ADMIN PW
PRESENT:22222
NEW :111--
OK
