33
E
Specications
n
Product Specications
Model PN-C703B
LCD component
70" Class [69-1/2 inch (176.6cm) diagonal] TFT LCD
Max. resolution (pixels)
1920 x 1080
Max. colors
Approx. 16.77 million colors
Pixel pitch
0.802 mm (H) × 0.802 mm (V)
Viewing angle
160° right/left/up/down (contrast ratio ≥ 10)
Screen active area inch (mm)
60-9/16 (W) x 34-1/16 (H) (1538.9 x 865.6)
Computer input signal
Analog RGB (0.7 Vp-p) [75
Ω
],
HDMI
Sync signal
Horizontal/vertical separate (TTL: positive/negative)
Video color system
NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play
VESA DDC2B
Input terminals
PC/AV HDMI x 3
PC Mini D-sub 15 pin, 3 rows x 1
Audio
3.5 mm mini stereo jack x 1
AV
Composite video
RCA
*
1
x 2
Component
RCA
(Y, Cb/Pb, Cr/Pr) *
1
x 1
Audio
RCA pin (L/R) x 2
Serial (RS-232C) D-sub 9 pin x 1
Output terminals Audio
RCA pin (L/R) x 1
Speaker output (internal/external) 10 W + 10 W/10 W + 10 W
6
Ω
Touch Panel
Detection method Infrared blocking detection method
PC connector USB (2.0 compliant) x 1
Power requirement AC 100 V - 240 V, 2.7 A, 50/60 Hz
Operating temperature
*
2
41°F to 95°F (5°C to 35°C)
Operating humidity
*
2
20% to 80% (no condensation)
Power consumption (Maximum / standby mode
*
3
) 235 W / 0.5 W
Dimensions (excluding protrusions) inch (mm)
Approx. 64-5/16 (W) x 4-5/16 (D) x 39-1/8 (H) (1633 x 109 x 994.5)
Weight lbs. (kg)
Approx. 123.5 (56)
*1 Composite video and component cannot be used simultaneously.
*2 In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are satised.
*3 When STANDBY MODE is set to LOW POWER. When STANDBY MODE is set to STANDARD: 23 W or less.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement
without prior notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
