38
E
Specications
n
ProductSpecications
Model PN-E471 PN-E421
LCD component
47" Class [46-15/16 inch (119.3cm)
diagonal] TFT LCD
42" Class [42-1/16 inch (106.7cm)
diagonal] TFT LCD
Max. resolution (pixels)
1920 x 1080
Max. colors
Approx. 1.06 billion colors
Pixel pitch
0.542 mm (H) × 0.542 mm (V) 0.485 mm (H) × 0.485 mm (V)
Viewing angle
178° right/left/up/down (contrast ratio ≥ 10)
Screen active area inch (mm)
40-15/16 x 23 (1039.7 x 584.8) 36-5/8 x 20-5/8 (930.2 x 523.3)
Computer input signal
Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75
Ω
]
Sync signal
Horizontal/vertical separate (TTL: positive/negative), Sync-on-green,
Composite sync (TTL: positive/negative)
Video color system
NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play
VESA DDC2B
Power management
VESA DPMS, DVI DMPM
Input terminals
PC/AV
Digital
HDMI x 1
PC
Analog
Mini D-sub 15 pin, 3 rows x 1
Audio
3.5 mm mini stereo jack x 1
Serial (RS-232C)
D-sub 9 pin x 1
When PN-ZB01
(optional) is
attached
PC/AV
Digital
DVI-D 24 pin (HDCP compatible) x 1
PC
Analog
BNC
*
1
*
2
x 1
AV
Composite video
BNC x 1
S-video
x 1
Component BNC (Y, Cb/Pb, Cr/Pr) *
1
x 1
Audio
RCA pin (L/R) x 2
Output terminals
Audio
RCA pin (L/R) x 1
Serial (RS-232C)
D-sub 9 pin x 1
When PN-ZB01
(optional) is
attached
PC/AV
Digital
DVI-D 24 pin x 1
External speaker 10 W + 10 W
[6
Ω
]
LAN terminal
[
When PN-ZB01 (optional) is attached
]
10 BASE-T/100 BASE-TX
Speaker output 10 W + 10 W
Power requirement AC 100 V - 240 V, 50/60 Hz
Operating temperature
*
5
32°F to 104°F (0°C to 40°C)
Operating humidity 20% to 80% (no condensation)
Power
consumption
Factory Setting (Audio input:
enabled / disabled)
225 W / 230 W 195 W / 200 W
Maximum (Audio input:
enabled / disabled)
255 W / 260 W 220 W / 225 W
Input signal waiting mode
*
3
/
Standby mode
*
4
2 W / 2 W 2 W / 2 W
When PN-ZB01
(optional) is
attached
Factory Setting (Audio input:
enabled / disabled)
225 W / 235 W 200 W / 205 W
Maximum (Audio input:
enabled / disabled)
260 W / 265 W 225 W / 230 W
Input signal waiting mode
*
3
/
Standby mode
*
4
4.8 W / 4.5 W 5 W / 4.5 W
Dimensions (excluding protrusions) inch (mm)
Approx. 42-5/8 (W) x 4-3/8 (D) x
24-3/4 (H) (1,083 x 111 x 628)
Approx. 38-5/16 (W) x 4-15/16 (D)
x 22-5/16 (H) (973 x 126 x 566)
Weight lbs. (kg)
Approx. 56.2 (25.5)
[
When PN-ZB01 (optional) is
attached: Approx. 57.3 (26)
]
Approx. 48.5 (22)
[When PN-ZB01 (optional) is
attached: Approx. 49.6 (22.5)]
*1 Cannot be used simultaneously.
*2 Does not support plug and play.
*3 When AUTO INPUT CHANGE is set to OFF.
*4 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER, PN-E471: 0.8 W, PN-E421: 0.8 W.
*5 Temperature condition may change when using the display together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specied by the optional equipments.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement
without prior notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
