EN
Instructions for the User
16
Press PT1 to enter the Special Function and rotate it to select a program,
the program starts to blink.The selection is linear from “X1” to “X5”, “X6” or
“X14”, corresponding “X” to “A”, “B”, “C”, “P” or “R”. While the Special
Function is being set the temperature is not displayed. Only the Special
Function is displayed blinking.
Press the PT1 knob to validate the program and enter the Cooking Time
and rotate it to set a new value, the Cooking Time value and symbol
start to blink.
Press the PT1 knob to validate the Cooking Time and enter the Delayed
Start.
The display DSP1 shows the actual Clock value and DSP2 “AUTO”.
In Delayed Start rotate PT1 to set a new time value, the time value in
DSP1 and Delayed Start symbol start to blink”. The selection is
circular from 0:00 minutes to 23:59 hours in one minute steps.
Press PT2 to initiate the program.
If a Delayed Start is set the program will only be initiated when the Clock
equals the time value set in 8. Until the program is initiated the displays
DSP1 and DSP2 will present the Cooking Time and Temperature
alternating with the Delayed Start. The Delayed Start can be override by
pressing PT2 again.
The temperature light will blink until the cavity temperature has
reached the set value. Press PT2 to start the cooking process.
The following table shows the four Special Functions, their programs, temperatures
and cooking times.
