Instructions for the user
9
After 10 minutes, the power is automatically reduced. It returns to position 9 and «P» disappears.
The interruption of the power function is possible by reducing the intensity of the heat at any moment.
The rear cooking zones are able to function on maximum power owing to the subtraction of power from
the front ones. In actual fact, whilst the «power» function is active, the front cooking zones will not be
able to function at a power level greater than 8 for the front left cooking zone and 7 for the front right
cooking zone, even if a higher power level has been selected.
This configuration can be seen by means of «9» which flashes at the same time as «8» (for the front left
plate) or «7» (for the front right plate) whilst the power function is active.
For this reason, the power function has priority over the heat accelerator.
If a pan is removed from the cooking zone whilst the power function is on, the function is stopped.
OVEN THERMOSTAT KNOB
Selection of cooking temperature is carried out by turning the knob clockwise to
the required temperature, between 50° and 275°C.
As the appliance has an electric oven, the warning light will come on when the
oven is heating up. When it goes out it means that the required temperature has
been reached. Regular flashing means that oven temperature is being
constantly maintained at the programmed level.
VARIABLE GRILL KNOB
Position the oven function knob on the symbol or .
Turn the variable grill knob clockwise to the desired position.
This allows you to vary the heat intensity when cooking with the grill. The knob
can be set with continuity between “0” and the stop release position, which
corresponds to maximum heat.
OVEN CONTROL KNOB
Each of the functions listed below can be used (except the oven light and the
small grill) only together with the correct temperature thermostat regulation as
described on paragraph “OVEN THERMOSTAT KNOB”.
TOP AND BOTTOM ELEMENTS GRILL ELEMENT + FAN
GRILL ELEMENT BOTTOM ELEMENTS + FAN
GRILL ELEMENT + ROTISSERIE FAN HEATING ELEMENT
BOTTOM ELEMENTS TOP AND BOTTOM ELEMENTS + FAN
HEATING ELEMENT
TOP AND BOTTOM ELEMENTS + FAN AUTOMATIC CLEANING CYCLE
(PYROLYSIS)
DOOR CLOSURE LIGHT
Whilst the automatic (Pyrolysis) cleaning cycle is on, this light comes on to
indicate that the oven door closure device is active.
