• Loosen the handle knobs on the sides of the handle, and
fold the upper handle down.
• Loosen the handle knobs, pull outwards on each side of
the lower handle, and lift the sides of the lower handle past
the edges of the handle mounting brackets. Fold the lower
handle forward. Make sure not to bend or kink the power
cord. (Fig. 10)
Troubleshooting
Faults which cannot be rectied with the aid of this table may
be rectied by a company specialist only (please call customer
service center at 1-866-766-9563).
8
Motor does not run
Motor power drops
Grass catcher is not
lled Sufciently
• Check mains connection cable
and circuit-beaker (fuse)
• Start on short grass or on an
area which has already been
mowed and tilt back
• Clean discharge channel/
housing (the mowing blade
must rotate freely)
• Correct the cutting height
• Correct the cutting height
• Clean discharge channel/
housing
• Have mowing blade
re-sharpened/replaced
(customer service center)
• Correct the cutting height
• Allow the lawn to dry
• Have mowing blade
re-sharpened/replaced
(customer service center)
• Clean the grille on the
grass catcher
• Clean the discharge
channel/housing
Problem Remedy
Fig. 10
