II-44
Details on [GPI/Tally] Menu
Chapter 7 Controlling External Devices
Fall: The trigger causes the output to decrease to a high
level, and that status will continue for a certain
duration (1 to 2 frames).
Any: Every time the trigger is activated, the output’s high
and low levels change alternately.
If the GPI outputs are used as tallies, the relationship
between Tally 1 to 8 and the input signals is as follows.
Details on [GPI/Tally] Menu
To display the [GPI/Tally] menu, display the [Setup] menu and press the V1 knob while [GPI/Tally] is selected.
Tally Input Signal
1SDI 1
2SDI 2
3SDI 3
4SDI 4
5DVI-1
6 HDMI-1/VIDEO 1
7 HDMI-2/VIDEO 2
8 HDMI-3/VIDEO 3
Menu item Description Knob Parameter Meaning Setting range Reference
page
GPI Input 1 Set the operation and trigger type of the
GPI input 1 contacts.
V3 Action Contact
operation
NotUse, CT, AT,
KeyCT, KeyAT,
Aux1CT, Aux1AT,
Aux2CT, Aux2AT,
SS1 to SS20
II-43
V4 Edge Trigger type NotUse, Rise,
Fall, Any
GPI Input 2 Set the operation and trigger type of the
GPI input 2 contacts.
V3 Action Contact
operation
NotUse, CT, AT,
KeyCT, KeyAT,
Aux1CT, Aux1AT,
Aux2CT, Aux2AT,
SS1 to SS20
II-43
V4 Edge Trigger type NotUse, Rise,
Fall, Any
GPI Input 3 Set the operation and trigger type of the
GPI input 3 contacts.
V3 Action Contact
operation
NotUse, CT, AT,
KeyCT, KeyAT,
Aux1CT,
Aux1AT,
Aux2CT, Aux2AT,
SS1 to SS20
II-43
V4 Edge Trigger type NotUse, Rise,
Fall, Any
