Precautions
■ Installation
●
Avoid placing the drive in a location subject to:
– high humidity
– high temperature
– excessive dust
– mechanical vibration
– direct sunlight.
Only horizontal drive operation recommended, not vertical or tilted.
■ Operation
●
Do not move drive during operation, it may cause an error.
●
Avoid sudden temperature changes, condensation may form inside
the drive. Should ambient temperature suddenly change, wait at
least 1 hour before turning off power. Operation immediately after
temperature change may cause a malfunction.
■ Transportation
●
Keep the original packing materials for future transport of the drive.
Hardware Installation
Installing the Drive Unit into the Computer
This example assumes an IBM-PC/AT* compatible computer,
a SCSI adapter card and a SCSI interface cable (50 pin flat) are at-hand.
Getting Started
Assure SCSI adapter is operational before installing CD-R/RW drive.
●
Prepare the necessary parts and tools not supplied:
– a screwdriver
– Two mounting rails if computer has mounting racks.
Precautions/Hardware Installation 7
Location and Function of Parts and Controls
Front Panel
Rear Panel
6 Location and Function of Parts and Controls
