Selecting Digital Audio Output
Initial Settings
51
Each DVD disc has a variety of audio output options.
Set the player’s Digital Audio Output according to the
type of audio system you use.
1.At the SETUP menu screen, press V/v to select
“Digital Audio Output” and press b.
2.Press V/v to select the desired output and
press ENTER.
You can select Digital Audio Output or Sampling
Frequency item by pressing ENTER.
■
Digital Audio Output
DOLBY DIGITAL/PCM: Select “DOLBY
DIGITAL/PCM” if an active digital output is supplied
to a Dolby Digital decoder, (or an amplifier or other
equipment with Dolby Digital decoder).
Stream/PCM: Select “Stream/PCM” if an active
digital output is supplied to an amplifier or other
equipment with DTS decoder, Dolby Digital decoder
and MPEG decoder.
PCM: Select “PCM” if an active digital output is
supplied to an amplifier or other equipment with lin-
ear PCM only (or MD recorder or DAT deck).
Sample Freq.
