
37
GB
The remaining charge indicator is incorrect.
• This phenomenon occurs when you use the camera in an extremely hot or cold location.
• A discrepancy arose between the remaining charge indicator and the actual remaining battery
charge. Fully discharge the battery pack once, then charge it to correct the indication.
• The battery pack is discharged. Insert the charged battery pack (page 11).
• The battery pack is dead. Replace it with a new one.
Cannot charge the battery pack while it is inside the camera.
• You cannot charge the battery pack using the multi-output stand (supplied) or AC Adaptor
(not supplied). Use the battery charger (supplied) to charge the battery.
Cannot record images.
• Check the free capacity of the internal memory or “Memory Stick Duo” (page 34). If it is full,
do one of the following:
– Delete unnecessary images (page 21).
– Change the “Memory Stick Duo”.
• You cannot record images while charging the flash.
• Set the mode switch to the desired mode.
• The image size is set to [1280×720 (Fine)] or [1280×720 (Standard)] and “Memory Stick
Duo” is inserted when recording movies. Do one of the following:
– Set the image size to [VGA].
– Insert a “Memory Stick PRO Duo.”
Vertical streaks appear when you are shooting a very bright subject.
• The smear phenomenon is occurring and white, black, red, purple or other streaks appear on
the image. This phenomenon is not a malfunction.
Cannot play back images.
• Press (Playback) button (page 21).
• The folder/file name has been changed on your computer.
• Sony does not guarantee playback of image files on the camera if the files have been
processed using a computer or recorded with another camera.
• The camera is in USB mode. Cancel the USB connection.
• You cannot play back the movies shot using another camera.
The images are played back successively.
• [Continuous Play] is set to [On]. Set [Continuous Play] to [Off] (pages 25, 26).
Shooting still images/movies
Viewing images