100
Troubleshooting
Anti-blur function does not work.
• The anti-blur function does not work when appears on the display.
• The anti-blur function may not work properly when shooting night scenes.
• Shoot after pressing the shutter button halfway down; do not press it fully down suddenly.
Recording takes a long time.
• The NR slow shutter function is activated (page 13). This is not a malfunction.
The image is out of focus.
• The subject is too close. Shoot in (Macro) recording mode. Make sure to position the lens
farther away from the subject than the shortest shooting distance, approximately 8 cm (3 1/4
inches) (W)/25 cm (9 7/8 inches) (T), when shooting. Or, set (Magnifying Glass) and
focus from a distance of approx. 1 cm to 20 cm (13/32 inch to 7 7/8 inches) from the subject
(page 24).
• (Magnifying Glass) is set, or (Twilight mode), (Landscape mode) or
(Fireworks mode) is selected in the Scene mode when shooting still images.
• The Focus preset function is selected. Select the auto focus mode (page 32).
Zoom does not work.
• When (Magnifying Glass) is selected, the optical zoom is not available.
• The smart zoom cannot be used when:
– The image size is set to [7M] or [3:2].
– Shooting in Multi Burst mode.
• The digital zoom cannot be used while shooting movies.
The flash does not work.
• The flash is set to (Flash forced off) (page 23).
• You cannot use the flash when:
– [Mode] (REC Mode) is set to [Burst], [Exp Brktg] or [Multi Burst] (page 47).
– (High sensitivity mode), (Twilight mode) or (Fireworks mode) is selected in the
Scene mode (page 30).
– Shooting movies.
• Set the flash to (Flash forced on) when (Magnifying Glass) is set, or (Landscape
mode), (High-speed shutter mode), (Beach mode), or (Snow mode) is selected
in the Scene mode (page 23).
Fuzzy specks appear in images shot using the flash.
• Dust in the air reflected the flash light and appeared in the image. This is not a malfunction.
The close-up shoot function (Macro/Magnifying Glass) does not work.
• (Twilight mode), (Landscape mode) or (Fireworks mode) is selected in the Scene
mode (page 30).
