27
To remove the batteries
Remove the batteries as illustrated below.
When to replace the batteries
You can check the remaining power of the
batteries in the display.
Battery power is full.
r
r
Battery power is getting low.
r
r
Battery power is low.
r
Lo * Batteries are depleted.
* Beep sounds.
When the batteries are depleted, replace both
batteries with new ones.
Notes
• The indicator sections of roughly show the
remaining battery power. One section does not
always indicate one-fourth of the battery power.
• Depending on operating conditions, the indicator
sections of
may increase or decrease.
You can use the following power sources:
• AC power adaptor (see “Playing a VIDEO
CD”)
• LR6 (size AA) alkaline batteries
For the battery life, see “Specifications.”
Using the dry batteries
Use only the following dry battery type for
your player:
• LR6 (size AA) alkaline batteries
Note
Be sure to remove the AC power adaptor when
using the dry batteries.
1
Open the battery compartment lid
inside your player.
2
Insert two alkaline batteries by
matching 3 to the diagram inside
the battery compartment and
close the lid until it clicks into
place.
B
Connecting to a power source
Connecting to a power source
(Continued)
