Setup menu settings (Continued)
Top menu
item
<SYSTEM 3>
<TRACKING>
Submenu items {nested
submenus in angle brackets)
<BANK>
<ISR>
AUTO TR
AUTO EQ
EXIT
LOAD
SAVE
EXIT
ISR
SPEED
EXIT
Function
Select one of the bank numbers
then
press the SET
button
to
read
in the setup data from a memory
bank.
Select a bank number, then press
the SET button to save the
current setup data in a memory
bank.
Return to <SYSTEM 3> menu.
Select whether to use REMOTE
connector for ISR (Interactive
Status Reporting).
Set data transmission speed in
ISR mode.
Return to <SYSTEM 3> menu.
Select whether to carry out outo
tracking.
Select whether to activate the
auto equalizer.
Return to top menu.
Setting values
0: factory default setup data.
1: setup data from bank 1.
2: setup data from bank 2.
3: setup data from bank 3.
1: save in bank 1.
2: save in bank 2.
3: save in bank 3.
—
OFF: no ISR; use as Sony 9-pin
protocol interface.
ON: use as ISR interface.
19200, 9600, 4800, 2400 or 1200 bps
—
OFF: no auto tracking
ONE- auto tracking once, when tape is
loaded
ON: continual auto tracking
OFF: no auto equalizer
ON: activate auto equalizer
—
Chapter 6 Setup Operations 6"5
