KLV-V40A10
2-682-277-11(1)
Getting Started
13
GB
1: Inserting batteries
into the remote
Notes
• Observe the correct polarity when inserting batteries.
• Dispose of batteries in an environmentally friendly way.
Certain regions may regulate disposal of the battery.
Please consult your local authority.
• Do not use different types of batteries together or mix old
and new batteries.
• Handle the remote with care. Do not drop or step on it, or
spill liquid of any kind onto it.
• Do not place the remote in a location near a heat source, or
in a place subject to direct sunlight, or in a damp room.
2: Preventing the TV
from toppling over
Attaching the Support Belt
1 Screw the support belt (supplied) to the TV
stand with a wood screw (supplied).
2 Attach the support belt to the TV stand, and
screw the belt with a securing screw
(supplied) using a coin, etc.
3 Adjust the length by pulling the support belt
towards you while holding the TV stand.
Notes
• Be sure to take measures to prevent the TV from
toppling over and causing injury.
• If the supplied wood screw does not fit depending on
the type of TV stand, or when the securing strength is
not enough, prepare commercial screws (3 to 4 mm)
to fit to the TV stand. Consult your dealer about the
types of screw.
When Mounting on a Wall
Be sure to use the following optional wall-mount
brackets to hang the TV on the wall.
KLV-V32A10/KLV-V26A10: SU-WL31
KLV-V40A10: SU-PW2
See the Instruction Guide supplied with the wall-
mount bracket on how to mount the TV on the wall.
Getting Started
Insert the #
side first.
010COV.book Page 13 Tuesday, May 23, 2006 9:06 AM
