
COLOR CCD CAMERA User Guide
30
COLOR CCD CAMERA User Guide
31
How to Use the Camera
3.SettheSSNRmodeto’ON‘andpresstheSET
button. Then you can adjust the noise reduction
level.
You can display pictures in color or black and white.
1.WhentheSETUPmenuscreenisdisplayed,select’DAY/NIGHT‘byusingtheUp
andDownbuttonssothatthearrowindicates’DAY/NIGHT‘.
DAY/NIGHT
2. Select a desired mode using the Left and Right buttons according to the picture
display you want.
COLOR : The picture is always displayed in color.
B/W : The picture is always displayed in black and
white.PleasepressSETUPbuttontoturnonor
off the burst signal on B/W mode.
AUTO : The mode is switched to ‘Color’ in a normal
environment, but switches to ‘B/W’ mode
when ambient illumination is low. To set up
the sswitching time or speed for AUTO mode,
presstheSETbutton.
-DWELLTIME:Youcanselectthedurationtimeaboutchangingtheday/night
mode. → 5s, 7s, 10s, 20s, 30s, 40s, 60s
- DURATION : You can select brightness of illumination about changing the
day/night mode.
EXTERN:Thismodeallowsyoutoapplyadesiredfiltertoexternalsignals.
•WhenusingaVideoAutoIrisLens,ifyousetthelensleveltolow,automatic
switchingbetweenColorandBlack&Whitemaynotoccur.
•YoucannotcontroltheDAY/NIGHTmenuwhenAGCintheEXPOSUREmenuis‘OFF’
Atthistime,theexchangebetweenDAYmodeandNIGHTmodeoperatesaslike
selecting‘COLOR’mode.
•Sincethecameramaynotfocusaswellunderinfraredilluminationatnightasit
doesundernormalillumination,installanExtra-lowDispersionLenstoobtain
sharp pictures.
Notes
* The brightness of illumination is changeable
by installed environment.
•YoucannotsettheSSNRto‘ON’or‘OFF’whentheAGCmodeoftheEXPOSURE
menuis‘OFF’.
•WhenadjustingthenoisereductionleveloftheSSNRmode,rememberthatthe
higher the level set, the more the noise level will be reduced but that after image
may also occur.
Notes
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.BACKLIGHT OFF
5.SSNR ON
6.DAY/NIGHT AUTO
7.IMAGE ADJ
Color → B/W B/W → Color
Fast 2.5 lux 4 lux
Slow 0.8 lux 6 lux