Basic Operations
Basic Operations
51
3 Press OK.
The date, start and stop times,
programme position, tape speed, and
VPS/PDC setting appear on the TV
screen.
• If “--” appears in the “PROG.”
(programme) column (this may
happen for local broadcasts), you have to set the appropriate
programme position manually.
Press >/. to select the desired programme position.
To record from a decoder or other source connected to the LINE-1
(TV) or LINE-2 IN (Scart) connector, press INPUT SELECT to
display “L1” or “L2.”
You will only have to do this operation once for the referred
channel. The VCR will then store your setting.
• When you have selected A (Austria), CH (Switzerland), or D
(Germany) with the country selection in the Auto Set Up
procedure, the VPS/PDC function is automatically set to ON.
For details of the VPS/PDC function, see “Timer recording with
VPS/PDC signals” on page 52.
If the information is incorrect, press CLEAR to cancel the setting.
4 If you want to change the date, tape
speed, and the VPS/PDC function
setting:
1 Press ?// to highlight the item
you want to change.
2 Press >/. to reset it.
• To record the same programme every
day or the same day every week, see “Daily/weekly recording”
on page 52.
• To use the VPS/PDC function, set VPS/PDC to ON.
continued
OK
PLAY
CLEAR
OK
PLAY
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENUEXIT :
TIMER
SP / LP
LIST
TIME PROG.
TODAY 519:00 20:00 3
SP VPS / PDC OFF
TUE28.9
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENUEXIT :
TIMER
SP / LP
LIST
TIME PROG.
TODAY 519:00 20:00 3
SP VPS / PDC OFF
TUE28.9
