Basic Operations32
OK
PLAY
To record the same programme every day or the same day every
week, press m while the date is flashing. For details, see “Daily/
weekly recording” below.
To record from a source connected to the LINE-1 IN or LINE-2 IN
(SLV-ED915PS/TH, ED818ME/SG, ED616ME/MJ/SG and ED515PS
only) jacks; press INPUT SELECT or PROG +/– to display “L1” or
“L2”(SLV-ED915PS/TH, ED818ME/SG and ED616ME/MJ/SG/
ED515PS only) in the “PROG” position.
3 Press , to confirm the setting.
The cursor (B) appears at the beginning of the line. To enter another
setting, move the cursor to the next line and repeat step 2.
4 Press OK.
5 Press ?/1 to turn off the VCR.
The
t
indicator appears in the display window and the VCR
stands by for recording.
To record from other equipment, leave the connected equipment
switched on.
OK
PLAY
• ]/1
Setting the timer manually (continued)
To stop recording
To stop the VCR while recording, press x STOP.
Daily/weekly recording
In step 2 above, press m to select the recording pattern. Each time you press
m, the indication changes as shown below. Press M to change the indication
in reverse order.
Tips
• To set the programme position, you can also use the PROG +/– or programme
number buttons.
• To set the tape speed, you can also use REC SPEED button.
• To record NTSC signals, set the tape speed to SP or EP. To record in the EP mode, set
the tape speed to “LP”.
Note
• The
t
indicator flashes in the display window when you press ?/1 with no tape
inserted.
the current date t SUN-SAT (Sunday to Saturday) t MON-SAT (Monday
to Saturday) t MON-FRI (Monday to Friday) t EVERY SAT ..... t EVERY
MON t EVERY SUN t 1 month later t (dates count down) t the
current date
