58
Setting the recording duration time
Master Page : Left
filename[010addo.fm] model name1[SLV-SE510B] [3-065-671-E1 (1) GB]
Settingtherecordingdurationtime
After you have started recording in the normal way, you can have the VCR stop
recording automatically after a specified duration.
Before you start...
• Refer to “Index to parts and controls” for button locations.
To extend the duration
Press z ENR repeatedly to set a new duration time.
To cancel the duration
Press z ENR repeatedly until the indicator disappears and the VCR
returns to the normal recording mode.
To stop recording
To stop the VCR while recording, press x STOP.
Note
• You cannot display the current tape time in the display window when setting the
recording duration time.
1
While recording, press z ENR.
The indicator appears in the display window.
2
Press z ENR repeatedly to set the duration time.
Each press advances the time in increments of 30 minutes.
The tape counter decreases minute by minute to 0:00, then the VCR stops
recording and turns off automatically.
SP
OPCMAGN
0:30 1:00
5:30 6:00
Enregistrement normal
