Sending images
9
On the Index (nine-image)
screen
a Set the MODE dial to , then
press the SMART ZOOM W
button once to switch to the
Index (nine-image) screen.
b Press Bluetooth.
The Bluetooth menu appears.
<Sending camera>
c Select [SEND] with b, then
press z.
d Select [SELECT] with B, then
press z.
e Select the image you want to
send with v/V/b/B, then press
z.
A mark is attached on the selected
image.
<Sending camera>
At this time, the image has not been
sent.
f To send other images at the
same time, repeat Step 5.
• The maximum number of images you can
send at a time is 54.
g Press Bluetooth.
h Select [OK] with B, then press
z.
The Bluetooth function starts up and
the SELECT THE RECEIVER screen
appears.
i Display the record of the
receiving camera with b/B or
perform a new search (page 7).
j Select [CONNECT] with v, then
press z.
“SENDING” is indicated and the
selected image is sent to the receiving
camera.
<Sending camera>
<Receiving camera>
• If passkey entry is required on the sending
and receiving cameras, enter the passkey
(page 17).
• If you run past the time limit for the
passkey entry (30 seconds), connect again.
When the images have been sent,
“SENT” is indicated on the sending
camera.
k Select [EXIT], then press z.
The Bluetooth function turns off and
the Bluetooth menu appears again.
To cancel the sending operation
Sending camera
Select [EXIT], then press z in Step 0.
The Bluetooth function is turned off and the
Bluetooth menu appears again.
SEND RECEIVE PRINT
SELECT MOVE TO NEXT
Bluetooth
EXIT
SENDING
OK
SONY Cyber–shotX
60
min
0/1
EXIT
RECEIVING
SONY Cyber–shot
00:0C:3E:3A:4B:69
OK
60
min
0/0
101
