34
Recording TV programmes using the ShowView system (SLV-SE210B only)
Recording TV programmes using the
ShowView system
(SLV-SE210B only)
The ShowView system is the feature that simplifies programming the VCR to make
timer recordings. Just enter the ShowView number listed in the TV programme guide.
The date, times, and programme position of that programme are set automatically.
You can preset a total of six programmes, including settings made with other timer
methods.
Before you start
…
• Check that the VCR clock is set to the correct time and date.
• Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording
time.
• To record from a decoder, turn it on.
• Turn on your TV and set it to video input.
• Set OPTIONS PROG. to SHOWVIEW or MIXTE in the RÉGLAGES UTILISATEUR menu
(see page 47).
• Refer to “Index to parts and controls” for button locations.
1
Press MINUTERIE.
• When you set OPTIONS PROG.
to MIXTE:
The OPTIONS PROG. menu
appears on the TV screen. Press
M/m to select SHOWVIEW, then
press OK.
• When you set OPTIONS PROG.
to SHOWVIEW:
The SHOWVIEW menu appears
on the TV screen.
MINUTERIE
OK
LECTURE
MENU:OK:RÉGLER
SÉLECT.
OPTIONS PROG.
NORMALE
SHOWVIEW
:
SORTIE
CODE 0– 9
SHOWVIEW
CODE –––––––––
:
MENU:OK:RÉGLER SORTIE
