5.0 Performance Specifications
This device shall fully support all video color systems using pass-though
capability.
The maximum video bandwidth shall be at least 10MHz. The maximum RGB
bandwidth shall be at least 150MHz. The device shall be capable of passing a
resolution of at least 1280x1024 pixels at 60Hz refresh.
This device shall support audio signals within the frequency range of 20Hz to
20,000Hz.
This device shall include a built-in stereo audio amplifier that is capable of
producing 150w per channel on 8 Ohm speaker loads, 200w on 4 Ohm speaker
loads and 150w when used with 70V speakers.
This device shall have a minimum audio signal to noise ratio of 94db, with less
than -85db of crosstalk between adjacent audio channels.
This device shall provide +48V DC power to the microphone inputs for use with
condenser type microphones. This feature shall be switchable on or off
independently on each microphone input channel.
This device shall provide slots for the integration of two wireless microphone
tuner modules, for use with handheld or body back style transmitters. The
transmitters and modules shall be available from the supplying manufacturer as
options. A UHF antenna shall also be available as an option for use with the
wireless system.
6.0 Dimensional Information
This device shall have maximum cabinet dimensions of 5.25 inches high by 19
inches wide and 13.88 inches deep. This device shall fit into a standard 19-inch
EIA rack, occupying no more than 3 EIA rack spaces.
This device shall not weigh more than 29 pounds.
7.0 Connectivity Information
This device shall provide for connection of multiple source devices without
employing the use of an external interface. These connections shall include the
following:
(4) Balanced microphone inputs on XLR 3-pin connectors
(2) Balanced microphone or line inputs on XLR 3-pin connectors
(1) Unbalanced stereo line input on RCA (Phono) connectors
