Indicator flashes quickly: Pairing in process
"'"
Indicator
flashes
(at about I-second interval) when responding
to
the Bluetooth receiving device: Connectable
(Paring successful)
"'"
Indicator flashes (at about 5-second intervals): Connected
Notes
• "Pairing in process"
of
this unit
is
released after about 5 minutes. Ifpairing
is
not established within about 5 minutes, repeat the above procedure from step
4. iPod backlight may turn on in this 5 minutes.
•
To
enter "Pairing in process;' you need to turn offthe power
of
this unit and
turn
on the power
of
iPod first.
When
not
completed pairing
Repeat the procedure from step
2.
To
quit
"Pairing in process"
Press
and
hold the power
button
of
this unit for about 1 second to
turn
off this unit.
~Q·Tip
When
paring this unit with a
number
of
Bluetooth receiving devices, repeat steps 3
to
5 for each device individually.
Note
For using the Bluetooth function, it
is
required that the Bluetooth device
on
the
other side
is
corresponding with the same profile
as
this unit. However, even
if
it
is
corresponding with the same profile, functions may differ depending on the
specification
of
the Bluetooth device.
12
us
