A SERVICE OF

logo

13
US
Move away the other components from the
surround amplifier or turn off the other
components.
Operation
The system does not work normally.
Disconnect the AC power cord (mains lead)
from the wall outlet (mains), then reconnect
after several minutes.
TA-SA100WR
(Surround amplifier)
AUDIO POWER SPECIFICATIONS
for the US model
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 3 ohm loads,
both channels
driven, from 120 -
20,000 Hz; rated 50
watts per channel
minimum RMS
power, with no
more than 0.7 %
total harmonic
distortion from 250
milliwatts to rated
output.
Amplifier section
US models:
Surround mode (reference) RMS output power
: 143W (per
channel at 3 ohms,
1 kHz, 10 % THD)
Other models:
Stereo mode (rated) 80 W + 80 W (at
3 ohms, 1 kHz, 1 %
THD)
Surround mode (reference)RMS output power
: 143 W (per
channel at 3 ohms,
1 kHz, 10 % THD)
* Depending on the source, there may be no
sound output.
Rated impedance: 3 - 16 Ω
General
Power requirements:
North American models: 120 V AC, 60 Hz
Mexican models: 120 V AC, 60 Hz
Taiwan models: 120 V AC,
50/60 Hz
Specifications