CASSETTE DECK OPERATION
Cassette playback
• Set the Function switch to TAPE.
• Press STOP/EJECT to open the cassette holder.
•Insert a recorded cassette.
• Adjust the sound using the VOLUME and DBBS controls.
• Press PLAY and playback will start.
* Playback stops when the tape in the deck reaches the end.
• For brief interruptions, press PAUSE.
*To restart playback, press this button once more.
•To stop, press STOP/EJECT.
* When the end of the tape is reached the PLAY button is released.
* The set will be switched off if the Function switch is in TAPE position and no buttons are
pressed.
Winding the tape
• Press FAST REWIND to search backward to the beginning of the tape.
• Press FAST FORWARD to search forward to the end of the tape.
Cassette recording
• Press STOP/EJECT to open the cassette holder.
• Insert the cassette.
• When monitoring during recording, adjust the sound using the controls VOLUME and DBBS
controls. These controls do not affect the recording.
• Start recording by pressing RECORD.
(The PLAY button is auotmatically also pressed).
* When the end of the tape is reached, the recorder buttons are released.
•To interrupt recording, press PAUSE.
•To continue recording, press PAUSE again.
• Press STOP/EJECT if you want to stop recording before the end of the tape.
On pressing again, the cassette holder will open.
• The set is switched off if the Function switch is in position TAPE and no buttons are pressed.
Recording from the CD-player
• Insert a blank or pre-recorded tape into the cassette compartment.
• Set the Function switch to CD.
• Start recording by pressing RECORD of cassette deck
(The PLAY button is automatically also pressed).
• Press PLAY/PAUSE of CD control to desired play track or from the beginning of the
programmed selection.
• As soon as the desired passage is reached, pause the CD and then start recording by
pressing RECORD.
7
