In this chapter we’ll cover:
l Designing and printing your own characters
l Designing proportional characters
In the previous four chapters of this manual you’ve learned
how to control the SR- lO/ 15 printer to give you dozens of different
typefaces. By using various combinations of pitches, character
weights, and font selections, you can create nearly any effect you
want to in text. And with international character sets and the
special text and graphics characters described in Chapter 8, you
can print almost any character you can think of.
But if “almost any character” isn’t good enough for you, then
it’s a good thing you have an SR-lo/15 printer! With it you can
actually create your own characters. As you’ll see in this chapter,
downloud characters can be used to print a logo, special characters
for foreign languages, scientific and professional applications,
or any other specific printing task.
DOT MATRIX PRINTING
In order to create download characters, you’ll need some un-
derstanding of how dot matrix printers work. They’re called “dot
matrix” because each character is made up of a group of dots.
Look closely at some printed characters produced by your
SR-lo/15 and you will see the dots. Figure 9-1 shows how the
letter “C” is formed by printing 15 dots.
The printhead in SR-lo/15 consists of nine thin wires stacked
one atop the other. Figure 9-2 shows an enlarged schematic view
of the front of the printhead, showing the ends of the wires and
their relationship to the printed characters. As you can see, the
capital letters use the top seven wires of the printhead, and the
CHAPTER 9
CREATING YOUR
OWN CHARACTERS
