– 3 –
Choosing a place for the printer
Before actually unpacking the printer, you should take a few minutes to
think about where you plan to use it. Remember the following points
when doing this.
✓ Choose a firm, level surface where the printer will not be exposed to
vibration.
✓ The power outlet you plan to connect to for power should be nearby
and unobstructed.
✓ Make sure that the printer is close enough to your host computer for
you to connect the two.
✓ Make sure that the printer is not exposed to direct sunlight.
✓ Make sure that the printer is well away from heaters and other sources
of extreme heat.
✓ Make sure that the surrounding area is clean, dry, and free of dust.
✓ Make sure that the printer is connected to a reliable power outlet. It
should not be on the same electric circuit as copiers, refrigerators, or
other appliances that cause power spikes.
✓ Make sure that the room where you are using the printer is not too
humid.
WARNING
✓ Shut down your equipment immediately if it produces smoke, a
strange odor, or unusual noise. Immediately unplug the equipment
and contact your dealer for advice.
✓ Never attempt to repair this product yourself. Improper repair work
can be dangerous.
✓ Never disassemble or modify this product. Tampering with this
product may result in injury, fire, or electric shock.
