A SERVICE OF

logo

1.3 Adjustment of the Presenter Sensor
1. Turn the printer o๎€ž and unplug the power cord.
2. Remove the screws. ๎€Ÿen, remove the board chassis.
3. Using the tip of a ballpoint pen or a similar object, set the DIP switches as follows: DSW1-4 OFF, DSW1-5 ON.
Screw
DIP Switch DSW1
Board chassis
4. Set paper into the presenter portion as shown below.
Li๎€œ the paper holder and insert the paper. Rotate the knob toward yourself to set the paper perfectly straight.
Paper Holder
Knob
- 5 -