28 Sun Fire X4140, X4240, and X4440 Servers Diagnostics Guide • August 2008
Changing POST Options
These instructions are optional, but you can use them to change the operations that
the server performs during POST testing. To change POST options:
1. Initialize the BIOS Setup utility by pressing the F2 key while the system is
performing the power-on self-test (POST).
The BIOS Main menu screen is displayed.
2. Select Boot.
The Boot Settings screen is displayed.
Main Advanced PCIPnP Boot Security Chipset Exit
******************************************************************************
* Boot Settings * Configure Settings *
* *************************************************** * during System Boot. *
* * Boot Settings Configuration * *
***
* * Boot Device Priority * *
* * Hard Disk Drives * *
* * CD/DVD Drives * *
***
***
* * * Select Screen *
* * ** Select Item *
* * Enter Go to Sub Screen *
* * F1 General Help *
* * F10 Save and Exit *
* * ESC Exit *
***
***
******************************************************************************
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
