A SERVICE OF

logo

Appendix B Using the BIOS Configuration Utility to Configure the Sun Blade RAID 5 Expansion Module 59
4. Select Initialize Drives.
A list of drives appears.
FIGURE B-3 shows an example of a system with multiple drives.
FIGURE B-3 List of Drives
5. Select drives to initialize.
Use the arrow keys to scroll through the list.
Use the space bar to select a drive.
Note You must initialize any drive that does not contain data or an operating
system. Normally, these are new drives that you have installed.
6. When you have selected a drive, press Enter.
A message warns you that initializing a drive erases array information from it.
7. Type yes.
The utility initializes the selected drives, and the main screen appears.