CD / mp3 Player
EN
35
CD Player
34
Program playback
Edit program
1. In STOP mode, enter the OSD banner to display the edit
playlist (program screen)
2.
2. Press UP/DOWN to select a track. Press OK.
3. Repeat steps 2 and 3 to add additional tracks to the pro-
gram.
4. Move to highlight “Done”, and then press OK to confirm
program playback or return to the stop mode.
5. Press PLAY during program edit to start program play-
back.
Cancel program
Program will be cancelled when;
1. the disc tray is opened;
2. power is turned off.
Intro scan
1. In STOP mode, select “Intro Scan” under playmode
menu.
2. Press OK on the remote control to start intro scan play-
back.
On- screen display for mp3 playback
Standard Play
File mode
1. In the playmode window, press UP/DOWN on the remote
to select the standard mode.
2. In the file window, use the arrow buttons on the remote
to select the file you wish to begin playing.
3. Press OK to select a file to play.
4. Press PLAY/PAUSE on the main unit or PLAY on the
remote control to start playback.
5. You may use the arrow buttons to selected the next file
to be played.
Playback will stop when all the files have been played.
Playmode selection for mp3
1. You can select your desired playmode in mp3 menu.
i. Standard - normal playback
ii. Program - play your programmed tracks
iii. Random - play tracks randomly
iv. Track repeat - repeat desired track
v. Folder repeat - repeat desired folder
vi. Disc repeat - repeat the whole disc
2. Press INFO on the remote to show the menu banner.
3. When the Play Mode window is highlighted, use
UP/DOWN to toggle different playmodes, then press OK to
confirm.
4. Press INFO on the remote to hide the menu banner on
screen.
