5
Chapter Introduction
Chapter 12 SNMP This module is used to configure SNMP function to provide a
management frame to monitor and maintain the network devices.
Here mainly introduces:
z SNMP Config: Configure global settings of SNMP function.
z Notification: Configure notification function for the
management station to monitor and process the events.
z RMON: Configure RMON function to monitor network more
efficiently.
Chapter 13 Cluster This module is used to configure cluster function to central
manage the scattered devices in the network. Here mainly
introduces:
z NDP: Configure NDP function to get the information of the
directly connected neighbor devices.
z NTDP: Configure NTDP function for the commander switch to
collect NDP information.
z Cluster: Configure cluster function to establish and maintain
cluster.
Chapter 14 Maintenance This module is used to assemble the commonly used system
tools to manage the switch. Here mainly introduces:
z System Monitor: Monitor the memory and CPU of the switch.
z Log: View configuration parameters on the switch.
z Cable Test: Test the connection status of the cable connected
to the switch.
z Loopback: Test if the port of the switch and the connected
device are available.
z Network Diagnose: Test if the destination is reachable and the
account of router hops from the switch to the destination.
Chapter 15 System
Maintenance via FTP
Introduces how to download firmware of the switch via FTP
function.
Appendix A Specifications Lists the glossary used in this manual.
Appendix B Configure the PCs Introduces how to configure the PCs.
Appendix C 802.1X Client
Software
Introduces how to use 802.1X Client Software provided for
authentication.
Appendix D Glossary Lists the glossary used in this manual.
Return to CONTENTS
