INSTALLATION
Connecting Power
1. Plug the AC Adaptor into the power socket at the rear of the Answer Machine.
2. Then plug the other end into your mains socket.
PREPARATION
Recording the Outgoing Message
To record the outgoing message (OGM) the caller hears when the Answer Machine
answers a call.
1. To record the OGM message, hold down until the
Answer Machine beeps.
2. Speak in a normal voice about 20cm (8 inches) away
from the microphone (located on the front of
the Answer Machine).
3. When you finish recording, press .
The Answer Machine automatically plays back the
outgoing message.
If no outgoing OGM is recorded when you press ,
“You have no announcement one” is announced.
To play back your outgoing OGM message at any time,
press , the Answer Machine
beeps and the outgoing message plays.
To record a new outgoing message simply follow
the above instructions.
Your old message will instantly be deleted.
