X’s-Drive II
+
VP2160
12
z If the message [ COPY OK ] pop on the screen , it indicates the files are successfully copied
And the HDD free memory will be displayed.
y All files transfered from each memory card are stored onto the Hard Disk in folders numerically,
under the name " CF0001 " , " MS0001" , "SM0001" , "SD0001".
y When the same card was inserted and copied twice, two different folders were created, VP2160
won't overwrite the folder.
y To stop the data transfer , just depress the Copy button and , the message [ COPY STOP]
will pop on the screen , then you can switch off the device .
8. Auto Power off Function
_________________________________________________________________
1) There is an auto screen- off function to save battery power .Thus if it is idle for 80
seconds ,It will shut off .
9. Battery Recharge:
_________________________________________________________________
1) To charge the batteries, please connect the plug of the AC adapter to DC 5V jack of
the main unit. When the Power LED indicator goes off, it indicates that the batteries are fully
charged.
2) Please use only the FUJIFILM NP-60 1100mA 3.7V rechargeable Li-ion battery.
3) For additional battery packs, please contact your dealer or you can purchase it
